Aménager un petit coin minéralogique dans une pièce multifonction

Creating a small mineralogy corner in a multi-purpose room

In a room that serves multiple purposes, a small tray helps define clear boundaries for the collection. A horizontal point, a heart, and a tumbled stone make up an initial selection that is easy to identify. The labels preserve the mineralogical character of this dedicated display.

What you need

  • 1 piece: Bitermined point - Green aventurine. Selected size: Length 4.5 cm; width 1 cm. View the reference.
  • 1 piece: Small FLAT Heart - Natural amethyst. Selected size: Width 3 to 3.5 cm; thickness 7 to 9 mm. View the reference.
  • 1 piece: Tumbled stone - Rock crystal. Selected size: 4 to 6 cm. View the reference.
  • A dedicated shelf.
  • A tray with a rim.
  • Three small labels.

For items sold by weight, take the number of stones indicated in the list. The total number of pieces in the lot varies depending on their size and weight.

Prepare the display area

Measure the available depth before placing the minerals. Keep their entire base inside the cabinet or on the support. Compare the combined weight of the pieces with the load capacity of the furniture, then choose the point from which you wish to view the arrangement.

The display, step by step

  1. Clear the surface and place the accessories empty. Check that the supports are flat and wide enough for the chosen pieces.
  2. Define the entire collection with the tray so that the shelf can be cleared.
  3. Present the bitermined point lying down, the heart flat, and a tumbled stone next to it.
  4. Slide each label in front of its piece, without sticking it to the stone.
  5. Leave a small empty area for the next acquisition.
  6. Observe the result from the usual distance. Correct any overlapping contours, then check the stability of each piece one last time.

The detail that matters

A tray makes storage easier, but do not transport the whole thing if the stones can slide.

Adjust the light and proportions

Start with diffused light and observe the surfaces from the main viewing point. Move an accessory slightly if its shadow or reflection obscures the stone. Keep the proportions of the actually chosen pieces: a small mineral is highlighted by moving closer or simplifying the background, without multiplying the accessories.

Back to blog